d letter icon

G30 LS Tec

The G30 LS Tec (Low-Spin Technology) driver offers a unique combination of low, stable spin with a high MOI for added distance with accuracy and control. Crown turbulators reduce aerodynamic drag to help increase clubhead speed and ball velocity for gaining distance, and lofts are adjustable plus or minus 1 degree. The T9S titanium alloy face is thin to maximize deflection for increasing ball speeds and distance.

    \n
  • \n
  • \n
  • d icon

    Turbulator Technology

    Crown turbulators reduce aerodynamic drag on the downswing, leading to increased clubhead speed and ball velocity for greater distance.

  • d icon

    Low, Stable Spin

    A CG that is back and extremely low (slightly forward of the standard G30 driver) delivers approximately 400 rpm less spin than the standard G30 driver with industry-leading MOI for maximizing distance, accuracy and control.

  • d icon

    Hotter Face Material

    A new high-strength, lightweight T9S titanium face is thinner and hotter to optimize face deflection for faster ball speeds and longer drives.

  • d icon

    Trajectory Tuning+ Technology

    Five loft settings allow you to fine-tune trajectory prior to a round for optimizing launch angle to maximize distance. Settings are standard, +0.6°, +1°, -0.6°, and -1°.

SPECIFICATIONS

G30 LS TEC Specifications

LoftLengthOffsetLieHead WeightHead SizeSwing WeightDexterity
9.0°45.75"No59.00°206.0g460ccD3RH/LH
10.5°45.75"No59.00°206.0g460ccD3RH/LH
  • These are design specifications that may vary due to manufacturing tolerances.
  • Standard swing weights for Soft R and Regular shafts are 1 point lighter than shown.

SHAFTS

Shaft Flex Torque Weight Launch Angle
TFC 419D click to zoom in Soft Regular 5.9° 53.0g High
PING TFC 419 Regular5.0°55.0gMid High
Stiff4.9°59.0gMid
X-Stiff4.2°63.0gLow Mid
TOUR 65 click to zoom in Regular 4.3° 57.0g Mid
PING Tour 65 Stiff3.4°61.0gLow Mid
X-Stiff3.2°66.0gLow
TOUR 80 click to zoom in Regular 3.3° 68.0g Mid
PING Tour 80 Stiff2.9°75.0gLow Mid
X-Stiff2.8°80.0gLow
TFC 80D click to zoom in Lite 6.4° 48.0g High
PING TFC189 Soft Regular5.5°53.0gHigh
TFC 59 DISTANCE click to zoom in Distance 5.5° 54.0g High
PING TFC 59 Distance
  • The Tour 65 shaft is available at an upcharge - default standard length is 45.25"
  • Tour 80 shaft is available at an up-charge, and is tip-trimmed 1" when installed in any driver - the default standard length is 45.25"
  • Weight is at cut length for standard length driver

To get the most distance from your driver, you must optimize the launch angle and spin rate of the ball by selecting the proper loft and shaft flex for your swing speed. Generally, golfers with slower swing speeds require more-lofted drivers and more-flexible shafts to achieve the proper launch conditions. Conversely, golfers with faster swing speeds generally require lower-lofted drivers and firmer shafts.

We recommend that you get fit for the shaft that allows you to play your best golf. Whether that’s a softer, lighter shaft with a higher launch or a heavier, stiffer shaft with a lower trajectory, a PING Certified Club Fitter can help you find the shaft that brings consistency to your game.

Flex Chart

2014 Driver Flex Chart click to zoom in

GRIPS

Grip Size | Color Code Description
PING 5L Round Grip click to zoom in
The 5L grip features a firmer texture in the upper portion to help control direction and a softer texture in the lower portion for enhanced feel. It is available in two versions - round for clubs with PING's Trajectory Tuning+ Technology, and ribbed for the hybrids and irons.
PING 5L Round Cord click to zoom in
The 5L cord grip features a firmer texture in the upper portion to help control direction and a softer texture in the lower portion for enhanced feel. Cord construction provides an extra-secure grip in all conditions. It is available in two versions - round for clubs with PING's Trajectory Tuning+ Technology, and ribbed for the hybrids and irons.

PING offers a variety of grip sizes and styles to fit different hand sizes and texture preferences. Since grip size influences your wrist action, and therefore the direction of your shots, it is commonly used by fitters to affect ball flight.

PING color-coded grips are available in six different diameters, and can be further customized with grip tape according to your needs. Once the neutral grip color code has been determined based on hand measurements, golfers may consider smaller diameter grips to help control fades and slices, or larger diameter grips to help control draws and hooks.

Grip Color Code Chart

Grip Chart click to zoom in

The 460cc G30 LS Tec driver is a good fit for anyone seeking low, stable spin with an industry-leading MOI for long, accurate drives. The CG is back and extremely low (slightly forward of the standard G30 driver) to generate approximately 400 rpm less spin while maintaining a high MOI for exceptional flight control and distance on off-center performance.

Turbulators on the crown of the Ti 8-1-1 head reduce aerodynamic drag on the downswing, helping to increase clubhead speed and ball velocity for gaining distance. A thin face made of a cutting-edge T9S titanium alloy maximizes deflection to increase ball velocity and distance with a high MOI while providing a deep, powerful sound. T9S offers a higher strength-to-weight ratio, allowing weight savings to be re-allocated to optimize the CG and increase forgiveness for improved accuracy.

Using Trajectory Tuning+ Technology, the 9° and 10.5° loft can be added or subtracted 1° for fine-tuning trajectory. Settings are Standard, +0.6°, +1°, -0.6°, and -1°. The TFC 419D high-balance-point shaft has a CG closer to the grip end, promoting a simultaneous increase in the clubhead’s energy, momentum and inertia.

G30 DRIVER

Turbulator Technology in the crown helps generate faster clubhead speed and ball velocity for longer, more accurate tee shots in the G30 and G30 SF Tec drivers.